994SMALL airco well® Starter Set S

Properties

Application area

Instructions

Cleaning the evaporator:
Place a collection tray under the condensate drain. Use footwell protection
on the passenger side. Remove the interior filter and get rid of any coarse dirt (e.g.
leaves) in the ventilation system. Guide the probe through the air trunking to the evaporator, carefully bending the probe if necessary (max. 45°). Fill the pressure cup gun with the entire contents of the airco well® 994 and connect to the compressed air. Place your thumb on the guide disc and perform the spray test. Ensure that the spray direction is correct and check whether the liquid flows into the tray. Rinse the entire evaporator by moving the probe back and forth.
Cleaning the pollen filter box:
Pull the cleaning cloth over the airco well® cleaning tool. Pull the holes over the hooks.
Shake airco well 998® for 15-20 seconds before use. Hold the tool and the cloth vertically, insert the 998 can and completely empty the contents. Wipe out the area evenly with the 998-soaked cloth. Discard the cloth after use.
Please observe the enclosed instructions as well as the manufacturer's specifications.
Vehicle-specific instructions can be found here:
https://haendler.aircowell.com/haendler/fragen-und-antworten/arbeitsanleitungen.php

Dosing

Set sufficient for cleaning three vehicle air-conditioning units.

Notice